splitboards:

free shipping

best warranty,

3 y. spare parts free

Splitboard sets:

save -20%

largest shop

europe

splitboards.eu EN
Top seller
NEW
third Strap mr.splitboards third-strap
Content 1 Pair
€15.70 *
Spark Pucks Spark Pucks Standard or Canted
Content 1 Pair
€103.99 *
Spark Screws Spark Screws
Content 5 Stück
€7.25 *
Hardboot Dual Height Wires Hardboot Dual Height Wires
Content 1 Pair
€78.78 *
Spark Heel-Cup Screws Spark Heel-Cup Screws
Content 2 Stück
€7.25 *
Spark Tech Toes Spark Tech Toes
Content 1 Pair
€246.85 *
Close filters
 
  •  
  •  
  •  
  •  
from to
1 From 2
No results were found for the filter!
NEW
Spark ST 2nd Board Kit T1
Spark ST 2nd Board Kit T1
ST 2nd Board Kit T1 operate a 2nd splitboard with a Spark binding - no problem. This is part of the idea that you can use several splitboards or snowboards (with ONE) with just one Spark binding. For T1 bindings: Arc ST and Surge ST...
Content 1 Pair
€78.78 *
NEW
backcountry kit Pro
Spark Backcountry KIT
Out and about in the backcountry? The Backcountry Kit contains everything you need to make sure you're equipped in case your Spark R&D binding breaks down. See product PIC for contents. The Pro Kit is only compatible with Spark Pro...
From €42.02 *
NEW
Spark Binding Hardware Kit Pro
Spark Binding Hardware Kit
Important hardware for your binding, useful if you ever lose a screw. Contents: 4x M6 x 12mm Heel Loop Screws (for XS bindings) 4x M6 x 16mm Heel Loop Screws (for S, M, L bindings) 3x M6 x 10mm Tesla Bracket Screws 2x M6 x 8mm Heel Rest...
From €19.96 *
NEW
Spark Rip N Flip Highback Arc
Spark Rip N Flip Highback
Content: 1 pair Built for the splitboarder who needs the latest and greatest in highback technology. The NEW Arc ST Asym Rip 'N' Flip Highbacks have the same great splitboard-specific features our Rip 'N' Flips are known for, but have...
From €61.97 *
NEW
Spark ST Tesla/T1 Bracket
Spark ST Tesla/T1 Bracket
The Spark ST Tesla/T1 Bracket if, for example, the brass bushings are defective. Scope of delivery: 2 pieces incl. screws The Bracket is compatible with all Spark R&D Tesla, Tesla T1, Burton Hitchhiker bindings.
€57.77 *
NEW
third Strap
mr.splitboards third-strap
The third Strap gives you even more grip on days with bad, hard snow conditions. It is important that you have your highback generally also set in the ascent in ride mode! Do not set the highback in the "negative" angle in the so-called...
Content 1 Pair
€15.70 *
Spark Tech Toes
Spark Tech Toes
Spark Tech Toes This recording (binding jaws) is important to be able to use the DYNO DH binding! The DYNO DH binding can only be used for descent. The ascent takes place via the Spark Tech Toes / Dynafit recordings with corresponding...
Content 1 Pair
€246.85 *
Spark Puck Screws
Spark Puck Screws
2 x Schrauben für die Alu Pucks von Spark Lieferumfang: 2 Stck.
Content 2 Stück
€7.25 *
Spark Heel-Cup Screws
Spark Heel-Cup Screws
2 x Schrauben für den Heel-Cup an der Baseplate Lieferumfang: 2 Stck.
Content 2 Stück
€7.25 *
Hardboot Dual Height Wires
Hardboot Dual Height Wires
Now made in-house by Spark R&D. 55mm (12°) and 75mm (18°) wires offer comfortable angles for any skin track. Comes with a heel adapter that screws right into your splitboard inserts, and places your dual height wires right where they...
Content 1 Pair
€78.78 *
Spark Screws
Spark Screws
2 x kurze Schrauben für Heel Rest 3 x längere Schrauben für Touring Braket Lieferumfang: 5 Stck.
Content 5 Stück
€7.25 *
Spark Padding Kits
Spark Padding Kits
Erhöhen Sie die Fußwärme und den Komfort auf langen Touren mit unseren Baseplate Padding Kits. Hergestellt aus haltbarem und griffigem EVA-Schaum. Der 3M-Kleber zum Abziehen und Aufkleben hält die Polster fest an ihrem Platz. Ideal für...
Content 1 Pair
€34.66 *
Spark Pucks
Spark Pucks Standard or Canted
The aluminium Spark Pucks have been available since 2015. Advantage: They are better to adjust because you have more options. It is easier to put the boat with binding in the desired e.g. central position. Disadvantage: On icy days (wet...
Content 1 Pair
€103.99 *
Hitchhiker Toe Lader
Hitchhiker Toe Lader
The Toe Loader is secured with a cotter pin, this can easily be lost. Therefore, always have cable ties with on the mountain or put the loader KIT in the backpack.
Content 1 Pair
€10.40 *
Fixie Clips Through-Mount
Fixie Clips Through-Mount
Our NEW Fixie Clips come in a sleek, lightweight aluminum design that features no moving parts. It’s stiff, simple, and requires no rotation - just put your board together and go. The Fixies have built-in adjustability to help compensate...
Content 1 Pair
€66.18 *
Spark Tip Tail Clips
Spark Tip Tail Clips
Our tip and tail clip design offers an individual fit to ensure variability in any board. At five, little by little. tighter notches, you can make your board as tight as you want. This clip is easy to use with gloves on. Easy...
Content 1 Pair
€34.66 *
Spark Solid Board Adapter
Spark Solid Board Adapter
We are upping our quiver game with these newly designed pucks for your solid board, because let’s face it, sometimes you’re just not on your split. Great for solid board mountaineering or snowmo-boarding. Perfect for trips where you are...
Content 1 Pair
€99.79 *
  -10% = 20.80 €
Bullet Tool black
Bullet Tool
Travelling in the backcountry? Since decades the classic for the splitboard binding on the mountain. No tool has so much power. Speed and safety make this 5-in-1 ratchet tool the first choice for both pros and those who want to be....
€23.11 *
SOLD
Spark Tesla/T1 Braket
Spark Tesla/T1 Braket
Der Spark Tesla/T1 Braket, wenn z.B. die Messing Buchsen defekt sind. Lieferumfang: 1 Stck. Tesla/T1 Bracket is compatible with all Spark R&D Tesla, Tesla T1, Burton Hitchhiker bindings.
€25.21 *
Whammy Bars
Whammy Bars
Whammy Bars erleichtert das Ausklappen der Steighilfe. COMPATIBILITY All Tesla T1 and T1 Burton Hitchhiker bindings.
Content 1 Pair
€34.66 *
Spark Dynafit Adapter
Spark Dynafit Adapter
Dynafit Adapter für's Splitboard wer einen Hardboot mit Dynafit Aufnahme besitzt, kann mit Hilfe der Dynafit Aufnahme diese nutzen.
Content 1 Pair
€51.47 *
Loctite 243 Schraubensicherung - mittelfest
Loctite 243 Schraubensicherung - mittelfest
LOCTIT 243 auch als das "blaue Loctite" bekannt. Sämtliche Splitboard Bindungen sind aus Metall, meist ALU und haben Schrauben. Bis einmal die richtige Einstellung gefunden ist, werden die zum Teil vom Hersteller aufgebrachten...
€10.49 *
Tesla T1 Rieser Kit
Spark Riser Kit T1
Especially helpful for riders with large boot sizes, Riser Kits increase the binding rotation angle while touring, preventing toe strike and increasing stride length. They come in two versions – Tesla and T1 Risers. Tesla Weight:...
Content 1 Pair
€38.87 *
Spark Fersen Fixierung T1 (Heel Locker)
Spark Fersen Fixierung T1 (Step Locker)
Der Spark Heel Locker T1 auch Step Locker genannt, ist um die Bindung ( ab ARC und SURGE ) an den Ferse zu fixieren. Somit werden kleine Abfahrten wie mit Ski oder skating für Flache stellen ermöglicht. Auch bei dem neuen Heel Locker (...
Content 1 Pair
€61.97 *
1 From 2
Viewed